Analysis HAL's 25kN HTFE-25 Turbofan Engine Makes Notable Technical Strides, Yet Persistent Delays Risk Hindering its Competitive Edge Globally

HAL's 25kN HTFE-25 Turbofan Engine Makes Notable Technical Strides, Yet Persistent Delays Risk Hindering its Competitive Edge Globally


The Hindustan Turbo Fan Engine (HTFE-25), an ambitious project by Hindustan Aeronautics Limited (HAL), represents a significant step in India's journey towards self-sufficiency in aircraft engine technology.

This 25 kilonewton (kN) thrust turbofan engine is being developed to power various aircraft, including trainer jets, unmanned aerial vehicles (UAVs), and potentially light combat or regional aircraft.

While the project has achieved considerable technical progress since its inception, ongoing delays raise concerns about its projected timelines and global competitiveness as of early 2025.

Initiated in 2013 by HAL's Aero Engine Research & Development Centre (AERDC) in Bengaluru, the HTFE-25 is designed as a twin-spool engine with features like a three-stage low-pressure compressor and a five-stage high-pressure compressor.

Its 25 kN thrust (around 5,620 pounds) makes it suitable for single-engine aircraft up to 5 tonnes or twin-engine aircraft up to 9 tonnes. Potential applications identified by HAL include trainer aircraft like the HJT-36 Sitara and advanced unmanned systems such as the Combat Air Teaming System (CATS) Warrior drone and High-Altitude Long Endurance (HALE) platforms.

Notably, HAL has funded the HTFE-25 project entirely from its own resources. This internal funding approach has allowed the company to focus on building long-term indigenous capabilities without direct pressure from the Indian Air Force (IAF) or the Ministry of Defence (MoD). However, this independence may also contribute to the project not adhering strictly to initial timelines.

Since the project began, the HTFE-25 has passed several important milestones. The engine's core component had its first successful test run back in December 2015. By 2019, two core engines had been built and subjected to extensive testing, accumulating 339 runs, including successful cold-start trials and tests at high altitudes in Leh. That same year, HAL explored a basic afterburner version, indicating potential for a more powerful variant reaching up to 40 kN thrust.

Development received a boost with the opening of a modern design and test facility at AERDC in December 2023, featuring advanced tools and dedicated test beds. By mid-2024, critical acceleration tests had reached 55% of the engine's target speed, and the full engine demonstrator completed its first run.

As of April 2025, development continues actively with two core engines undergoing testing. However, HAL's original goal of completing validation by 2025 appears unlikely. Current estimates suggest a delay of 2-3 years, pushing this phase to 2027-2028.

Experts anticipate that the transition from a tested technology demonstrator to a fully certified, flight-ready engine could take another five years or more, possibly placing final certification around 2029-2030.

This extended schedule highlights the inherent complexities of aero-engine development, possibly amplified by the internal funding model which lacks the external deadlines often imposed by defence procurement programs.

The specific aircraft platforms that will ultimately use the HTFE-25 also remain uncertain. Initial thoughts linking it to the HJT-36 trainer or even upgrading the Jaguar fleet seem to have shifted. HAL now appears focused on UAVs, particularly those within the CATS program. However, these applications still require formal adoption by the IAF, leaving the engine without a confirmed lead project to drive its final stages.

Investment in infrastructure, like the AERDC facility inaugurated in 2023 by Defence Secretary Giridhar Aramane, has significantly aided the engine's refinement. Furthermore, the development of an afterburner variant holds promise for expanding the engine's use to light combat aircraft or drones, provided the core engine achieves certification first.

Despite progress, significant challenges remain. A critical hurdle is the lack of a dedicated flying testbed aircraft (like a modified large transport plane) needed for comprehensive high-altitude testing under realistic flight conditions. Critics point out that the pace of development, often a concern with HAL projects, risks India falling behind as global competitors push towards next-generation engine technologies. The absence of a firm IAF requirement for the engine also complicates long-term planning and resource commitment.

Looking forward, HAL intends for the HTFE-25 to be a foundational technology for future, more advanced engine programs. With an estimated potential market of 200-250 engines for military trainers, UAVs, and possibly small civilian jets, success would bolster India's position in the global aero-engine market and reduce reliance on imported engines. The afterburner version, if successfully developed and certified, could meet future IAF needs for powered platforms in light combat roles.

To realise this potential and overcome the current delays, HAL may need to accelerate progress, possibly through enhanced collaboration with private industry and academic institutions, and secure a definitive commitment from an end-user like the IAF. Integrating the HTFE-25 into a confirmed program, such as the CATS ecosystem or a future trainer aircraft, could provide the necessary momentum for its final development and certification phases.
 
Can't make it in last 80 years since jet aged dawned, yet feel competitive globally is spunk that's unmatched globally.It will keep making strides eternally till it powers pushpak turboprops into jet age.
 
This is a project funded by HAL. A good way to start on small KN. Since this is also proving to be a challenge, the government should ask them to work with GTRE. GTRE's engine has achieved close to 50 KN.

Also, some private companies are interested in forming a consortium for jet engines. Ask them to develop 10 to 20 KN engines first. Once they develop smaller KN engines, they should be asked to develop higher KN engines for civilian and military applications.
 
Here goes another project into HAL's spiral of delays and excuses. Say bye to timely induction of CATS Warrior.
 
I have said this a million times. To develop such projects, it needs a significant amount of R&D. And R&D is not just conducted by one company like HAL. HAL barely does any R&D at all. Without R&D, YOU WILL NEVER DEVELOP ANYTHING ON YOUR OWN!

There are different levels of R&D.

Stage 1 starts at Universities. PhD professors and researchers lay the foundation of innovation by providing the most complex task of providing small-scale experiments. These are based on core fundamentals of Physics, Chemistry and Mathematics.

Stage 2: DRDO or other Research Institutes. They will take the research papers and experiments conducted by Universities and advance it further using the large research budget provided by the government. They would conduct much more advanced R&D and even hire industry experts to figure something out. They would have the knowledge of what the Armed Forces want and they would make a viable or feasible prototype with lots of testing.

Stage 3: Companies. These guys now take on the prototype projects and turn it into a real production-ready product. They will provide certain components to different vendors. Make a lot of changes or improvements. R&D would be conducted on the Metallurgical level, Manufacturing technologies like 3D printing or casting etc.

After that, you might have your engine.
 
Hatred is fine, but at least get your facts right. CATS Warrior is not dependent on HTEF-25.
My bad, there is no hatred but frustration. If I am not wrong, there is another MUMT jet planned to be powered by HTFE 25.
 
GOI & IAF must delink from HAL slowly but surely if they seriously want growth of the aero sector in India.
 
HTFE 25, if successful, is a good thing, but until it is developed, can't say anything about this project because that is the trust each taxpayer has on HAL (except those working there and their kin).
 
This is a project funded by HAL. A good way to start on small KN. Since this is also proving to be a challenge, the government should ask them to work with GTRE. GTRE's engine has achieved close to 50 KN.

Also, some private companies are interested in forming a consortium for jet engines. Ask them to develop 10 to 20 KN engines first. Once they develop smaller KN engines, they should be asked to develop higher KN engines for civilian and military applications.
By the way, I have no example of a major defence aerospace company that makes both aircraft and engines simultaneously. An aircraft manufacturer (Lockheed Martin, Boeing, Airbus, Dassault, etc.) always acquires engines from a different dedicated engine manufacturer (Rolls Royce, GE, Safran, CFM International...).

Both are very complex tasks and even major players don't do them themselves. The very idea that both types of projects go to one and only HAL is a failed one...
 
By the way, I have no example of a major defence aerospace company that makes both aircraft and engines simultaneously. An aircraft manufacturer (Lockheed Martin, Boeing, Airbus, Dassault, etc.) always acquires engines from a different dedicated engine manufacturer (Rolls Royce, GE, Safran, CFM International...).

Both are very complex tasks and even major players don't do them themselves. The very idea that both types of projects go to one and only HAL is a failed one...
This HAL is doing this from its own funds. No one can stop that. Maybe once they taste success, they may spin off a subsidiary which produces engines for civilian and military applications.
 
Are we that daft that after so many years of assembling aircraft and dealing with foreign engines, we are unable to reverse engineer a jet engine?
 
This is a brilliant engine but its technology now needs to certified properly before it’s junked. The engine has gone through many tests with it showing very good progress and performance. We can also use it to power our jet trainers, UCAV drones, light fighter jets or passenger planes if modified slightly.
 
Time to hand this over to private consortium, it would be good test of private and public partnership, bring in professional management with realistic timeline. It appears public sector creates projects to just provide job security.
 
HAL always takes good initiatives but fails in delivery.
Anyways it's time for a collaborative approach where HAL, GTRE, Godrej Aerospace, L&T defence and ISRO should work together in a mission mode to give the nation it's first successful aero engine.
 
Never mind. Perfecting a major piece of hardware takes time and many iterations. The Manik engine was started in 2013 and, after many setbacks, successfully completed in 2022 or 2023.
 
By the way, I have no example of a major defence aerospace company that makes both aircraft and engines simultaneously. An aircraft manufacturer (Lockheed Martin, Boeing, Airbus, Dassault, etc.) always acquires engines from a different dedicated engine manufacturer (Rolls Royce, GE, Safran, CFM International...).

Both are very complex tasks and even major players don't do them themselves. The very idea that both types of projects go to one and only HAL is a failed one...
It happens with companies who just assemble, not manufacture core components themselves. HAL has two decades of experience assembling AL-31 engines from Russian kits, but has not gained much expertise.
 
Do not put the cart before the horse. All intricate manufacturing is preceded by active research first, which is maintained throughout the developmental stage. It is not possible to carry out manufacturing of such engines without a parallel research wing accompanying the development.
 
Are we that daft that after so many years of assembling aircraft and dealing with foreign engines, we are unable to reverse engineer a jet engine?
The core part of a jet engine consists of advanced materials which cannot be reverse engineered. You need some espionage for that type of technology.
 
India needs to develop multi small engine fighter aircraft, for example, up to 10 small engines in a fighter jet for 110kN++. They should optimise the weight for a single 10kN engine. This would be similar to multi-core processors in computer chips where cores are used only when there is processing demand and saves power and reduces heat. India needs to innovate and not copy other nations!
 

Forum statistics

Threads
4,448
Messages
48,068
Members
3,014
Latest member
Anupam mishra
Back
Top