ADA to Start Preliminary Studies on Tailless 6th-Gen Fighter, Prioritizing Blended Wing-Body & Shape-Shifting Tech

ADA to Start Preliminary Studies on Tailless 6th-Gen Fighter, Prioritizing Blended Wing-Body & Shape-Shifting Tech


The Aeronautical Development Agency (ADA), a premier nodal agency under India’s Defence Research and Development Organisation (DRDO), has initiated high-level internal research into a sixth-generation tailless fighter jet.

This ambitious undertaking aims to define the technological parameters for the future of India’s aerial warfare capabilities, focusing heavily on stealth, adaptability, and network-centric operations.

While currently classified as an in-house initiative, these preliminary studies are designed to assess the feasibility of advanced technologies and forecast future combat requirements.

Once this initial pre-research and development phase is concluded, the ADA intends to engage in extensive consultations with the Indian Air Force (IAF). This joint evaluation will help crystallise the operational requirements before the agency seeks official funding to formalise the research and establish a robust design framework.

At the heart of this conceptual platform is a shift towards blended wing-body (BWB) and flying-wing configurations.

These designs are being prioritised to achieve superior aerodynamic efficiency and broadband stealth. By removing vertical stabilisers—the "tails" found on conventional jets—and reducing sharp edges that reflect radar waves, these configurations significantly lower the aircraft's radar cross-section.

Additionally, the BWB design offers increased internal volume, allowing for larger fuel tanks and internal weapons bays, which are critical for maintaining stealth during long-range missions.

A standout feature of this research is the development of "morphing wing" technology.

This innovation utilises smart materials, such as shape memory alloys (SMAs), to allow the aircraft's wings to change their curvature (camber) in real-time without the use of traditional mechanical flaps or slats.

Recent breakthroughs by DRDO scientists have demonstrated that these SMAs can actuate shape changes in mere milliseconds.

This seamless adaptation eliminates the gaps and hinges associated with conventional control surfaces, which are major sources of radar reflection, thereby optimising both stealth and agility across various flight regimes.

According to defence sources, the Indian Air Force envisions this sixth-generation platform as a heavy-class fighter, larger than the upcoming Advanced Medium Combat Aircraft (AMCA) and comparable in size to the Russian Sukhoi Su-57.

It is anticipated that this futuristic jet could eventually serve as the successor to the formidable Su-30MKI fleet, offering enhanced payload capacity, extended range, and the ability to execute deep penetration strikes and air dominance missions in highly contested environments.

Although the programme is in its nascent stages, it underscores India's strategic resolve to keep pace with global aerospace advancements. Major powers such as the United States, China, and European consortiums are actively pursuing similar adaptive, tailless designs for their next-generation systems.

By investing in these core technologies now, the ADA is laying the groundwork for a platform—potentially manned or optionally manned—that will integrate artificial intelligence, directed energy weapons, and drone swarm coordination to secure India's skies in the decades to come.
 
There are 3 important questions here.
First, what about the engines?
2nd what about the engines ?
and 3rd what about the engines???
 
Probably fake news. Tho if it is right then its a great news. Maybe we can collaborate with Safran on this engine too or just pick up 5th gen engine tech from the AMCA one and initiate our own VCE studies (though they will take a lot of time).
 
I believe India needs to urgently speed up the development of the AMCA and Tejas Mk2 projects. The prototypes for both aircraft should come as early as possible, because delays at the prototype stage push everything else back—testing, production, and induction.
Another critical issue is engine development, especially the Kaveri engine. The government should be directly involved and ensure that the project is funded to the maximum extent possible. Fighter engine development is a strategic capability, and without strong, consistent funding and oversight, true self-reliance is not achievable.
India also needs advanced engine testing and certification facilities within the country. Relying on foreign testing infrastructure slows development and limits our independence. Indigenous testing facilities would greatly improve timelines and strengthen our aerospace ecosystem.
With strong government leadership, adequate funding, and faster decision-making, projects like AMCA, Mk2, and Kaveri can move forward much more effectively and support India’s long-term defence self-reliance.
 
Probably fake news. Tho if it is right then its a great news. Maybe we can collaborate with Safran on this engine too or just pick up 5th gen engine tech from the AMCA one and initiate our own VCE studies (though they will take a lot of time).
Why do you think it's a fake news
 
Probably giving a thought on these advanced technologies definitely a right step but not at the cost of the AMCA and Tejas Mk2. As we need to conclude one technology into a production stage before just dreaming about future technologies when you have urgent work in hand. And every development has to have very strict timelines at every level including production and testing integrated in the time lines. Our decision making also needs to be time bound and not at the discretion of the Babu's and politicians. Every small delay should be cleared by the IAF as reasonable not at the hands of the Babu's who don't have to face the brunt of a war sitting comfortably in their Air conditioned offices and not responsible to defend the nation at the border. There should be a cross service on deputation Between the uniformed and non uniformed decision makers to be at par with ground realities to understand the seriousness of each delay. Hope the powers that are take note of this suggestion 🙏
 
Stop the stupid 2% rule and invest 3-5% for the next 10 years otherwise you will suffer a great defeat by the Chinese.

China is spending 3-6 times more then what they show according to studies
 
While thinking about Gen VI is good, I personally feel we are digging a hole by trying to be too advanced for our own good. What we should do is get the blended design quickly ( easily doable with AMCA lessons) fit a Gen V engine to get it flying early. Leave the more difficult things of shape shifting and Gen VI engine for later upgrade. Both these tech are something that would take a long time to even be ready for integration. If we wait for those we will get them in service probably after 2060 in best case. Better do the rest and get a Gen VI fighter in service around 2050.
 
Why do you think it's a fake news
Because 6th gen fighters are extremely hard and costly to develop. Its a totally new thing from 4.5 and 5th gen jets. The engine is the main component. A jet is designed around an engine but we don't even have a 4.5 gen engine right now so thats gonna be really problematic. We can initiate such a program only after AMCA mk2 is completed because that would give us almost all the technology needed for this program, except ACT engines, which we can later develop on our own taking the AMCA engine as a base.
 
Because 6th gen fighters are extremely hard and costly to develop. Its a totally new thing from 4.5 and 5th gen jets. The engine is the main component. A jet is designed around an engine but we don't even have a 4.5 gen engine right now so thats gonna be really problematic. We can initiate such a program only after AMCA mk2 is completed because that would give us almost all the technology needed for this program, except ACT engines, which we can later develop on our own taking the AMCA engine as a base.
You are all right, but these only apply to devlopment of airframe, avionics, weapon integration not in individual systems which are involved in development of any particular component like any flight computer, hydraulics, tyre, canopy, radar(until you are sure with the weight), similarly wing morphing and BWB are concepts which are thought to be applied in 6th gen platforms so we can start their devlopment anytime on different prototypes hence we can use them on 6th gen platforms only with minimum integration research and trials thus much saving our time
 

Forum statistics

Threads
5,986
Messages
61,506
Members
4,732
Latest member
mamai111
Back
Top